- Created AccountLockoutService to track failed login attempts
- Accounts are locked after 5 failed attempts within 15 minutes
- Lockout duration: 30 minutes (auto-unlock)
- Service uses Redis for persistence (fail-open if Redis unavailable)
- Integrated into AuthService Login method:
* Check account lockout status before login
* Record failed attempts (even for non-existent users to prevent enumeration)
* Reset failed attempts counter on successful login
* Auto-unlock expired accounts
- Added SetAccountLockoutService method to AuthService
- Service initialized in router when Redis is available
Phase: PHASE-4
Priority: P1
Progress: 9/267 (3.4%)
- Enhanced PasswordValidator with additional security checks:
* Maximum length validation (128 characters)
* Common password detection (password, 123456, qwerty, etc.)
* Repetitive pattern detection (aaaa, 1111, etc.)
* Sequential pattern detection (1234, abcd, qwerty, etc.)
- Added ValidatePasswordChange method to ensure new password is
sufficiently different from old password (similarity check)
- Updated PasswordService to use enhanced validator consistently
- Replaced utils.ValidatePasswordStrength with validators.PasswordValidator
- All password operations now use the same comprehensive validation rules
Phase: PHASE-4
Priority: P1
Progress: 8/267 (3.0%)
- Applied RegisterRateLimit to POST /auth/register (3 attempts/hour)
- Applied PasswordResetRateLimit to password reset endpoints (3 attempts/hour)
- Added VerifyEmailRateLimit for POST /auth/verify-email (5 attempts/hour)
- Added ResendVerificationRateLimit for POST /auth/resend-verification (3 attempts/hour)
- Login endpoint already had rate limiting (5 attempts/15min)
- All rate limits are IP-based and use Redis for persistence
- Rate limiting disabled in test/e2e environments
Phase: PHASE-4
Priority: P1
Progress: 7/267 (2.6%)
- Added additional filters: resource_id, ip_address, user_agent
- Added page-based pagination support in addition to offset-based
- Added CountLogs method to get total count for pagination
- Standardized SearchLogs handler to use RespondSuccess/RespondWithAppError
- Replaced c.Get with GetUserIDUUID helper
- Improved validation for query parameters
- Response includes total count, page, total_pages, and offset metadata
Phase: PHASE-2
Priority: P2
Progress: 41/267 (15.4%)
- Standardized GetSharedTrack handler to use RespondSuccess/RespondWithAppError
- Handler validates share token via TrackShareService.ValidateShareToken
- Handler retrieves track by share.TrackID
- Handler properly handles errors (share not found, expired, track not found)
- Handler returns track and share information
- Handler uses standard API response format
- Endpoint is public (no authentication required)
Phase: PHASE-2
Priority: P1
Progress: 36/267 (13.5%)
- Standardized RevokeShare handler to use RespondSuccess/RespondWithAppError
- Handler validates share ID and checks ownership
- Handler revokes share link via TrackShareService.RevokeShare
- Handler properly handles errors (share not found, forbidden, internal errors)
- Handler uses standard API response format
Phase: PHASE-2
Priority: P1
Progress: 35/267 (13.1%)
- Standardized GetUserLikedTracks handler to use RespondSuccess/RespondWithAppError
- Added limit validation (max 100)
- Moved route from setupTrackRoutes to setupUserRoutes in protected group
- Handler uses existing TrackLikeService methods
- Handler returns paginated results with tracks, total, limit, and offset
- Handler uses standard API response format
Phase: PHASE-2
Priority: P1
Progress: 34/267 (12.7%)
- Standardized BatchDeleteTracks and BatchUpdateTracks handlers
- Handlers use RespondSuccess and RespondWithAppError
- BatchDeleteTracks validates IDs, checks ownership, deletes in batch
- BatchUpdateTracks validates IDs and updates, checks ownership, updates in batch
- Both handlers return results with successful and failed operations
- Handlers use standard API response format
Phase: PHASE-2
Priority: P2
Progress: 33/267 (12.4%)
- Standardized GetProfileCompletion handler to use GetUserIDUUID
- Added validation to ensure completion percentage is between 0 and 100
- Handler already existed and was working correctly
- Endpoint returns correct completion percentage (0-100) and missing fields
- Handler uses standard API response format
Phase: PHASE-2
Priority: P1
Progress: 32/267 (12.0%)
- DeleteAvatar handler was already implemented and standardized
- Added route: DELETE /users/:userId/avatar
- Handler validates user authentication and ownership
- Handler deletes avatar file from storage and updates database
- Handler uses standard API response format
Phase: PHASE-2
Priority: P1
Progress: 31/267 (11.6%)
- Added GetStreamInfo method to HLSService
- Added GetStreamInfo handler in HLSHandler
- Standardized GetStreamStatus handler to use RespondSuccess/RespondWithAppError
- Added routes: GET /tracks/:id/hls/info and GET /tracks/:id/hls/status
- GetStreamInfo returns general stream information
- GetStreamStatus returns status with processing info if applicable
- Handlers use standard API response format
Phase: PHASE-2
Priority: P1
Progress: 29/267 (10.9%)
- Added BlockUser and UnblockUser methods to SocialService
- Added BlockUser and UnblockUser handlers in ProfileHandler
- Added routes: POST /users/:id/block and DELETE /users/:id/block
- Handlers use existing SocialService methods
- Includes validation to prevent users from blocking themselves
- Added IsBlocked helper method to check block status
- Handlers use standard API response format
Phase: PHASE-2
Priority: P2
Progress: 27/267 (10.1%)
- Added FollowUser and UnfollowUser handlers in ProfileHandler
- Added socialService field and SetSocialService method
- Initialized SocialService in setupUserRoutes
- Added routes: POST /users/:id/follow and DELETE /users/:id/follow
- Handlers use existing SocialService methods
- Includes validation to prevent users from following themselves
- Handlers use standard API response format
Phase: PHASE-2
Priority: P2
Progress: 26/267 (9.7%)
- Standardized API responses in notification handlers
- Replaced c.Get with GetUserIDUUID for consistent user ID extraction
- Added routes: GET /notifications, POST /notifications/:id/read, POST /notifications/read-all
- Initialized NotificationService and NotificationHandlers in router
- Handlers and service already existed, only routes and response standardization were needed
Phase: PHASE-2
Priority: P1
Progress: 25/267 (9.4%)
- Added UpdateRoom method to RoomService with ownership check
- Only room creator can update the room
- Added UpdateRoomRequest type
- Added UpdateRoom to RoomServiceInterface and RoomHandler
- Added PUT /conversations/:id route
- Handler uses standard API response format
- Service updates name and/or description fields
Phase: PHASE-2
Priority: P1
Progress: 21/267 (7.9%)
- Added RemoveMember method to RoomService and RoomServiceInterface
- Corrected RemoveMember in RoomRepository to use uuid.UUID
- Added AddParticipant and RemoveParticipant handlers
- Added POST /conversations/:id/participants route
- Added DELETE /conversations/:id/participants/:userId route
- Handlers use standard API response format
- Handlers reuse AddMember/RemoveMember service methods
Phase: PHASE-2
Priority: P1
Progress: 20/267 (7.5%)
- Added DeleteRoom method to RoomService with ownership check
- Only room creator can delete the room
- Added DeleteRoom to RoomServiceInterface and RoomHandler
- Added DELETE /conversations/:id route
- Handler uses standard API response format
- Service performs soft delete via GORM
Phase: PHASE-2
Priority: P1
Progress: 19/267 (7.1%)
- Added GET /tracks/search route in setupTrackRoutes
- Initialized TrackSearchService and set it in TrackHandler
- Handler SearchTracks and TrackSearchService already existed
- Supports query params: q, genre, artist, page, limit
- Service handles pagination, filtering, and returns tracks with pagination metadata
Phase: PHASE-2
Priority: P1
Progress: 18/267 (6.7%)
- Created SearchUsers method in UserService with pagination support
- SearchUsers searches by username, email, first_name, and last_name using ILIKE
- Added SearchUsers handler in ProfileHandler with query params (q, page, limit)
- Added GET /users/search route in setupUserRoutes
- Returns paginated results with total count
- Password hashes are excluded from results
Phase: PHASE-2
Priority: P1
Progress: 17/267 (6.4%)
- Standardized API responses in RoleHandler (RespondSuccess, RespondWithAppError)
- Added GET /api/v1/roles endpoint
- Added GET /api/v1/roles/:id endpoint
- Added POST /api/v1/users/:userId/roles endpoint
- Added DELETE /api/v1/users/:userId/roles/:roleId endpoint
- Created setupRoleRoutes function for role routes
- Handlers support both :id and :userId parameters
- All endpoints require authentication
Phase: PHASE-2
Priority: P1
Progress: 16/267 (6.0%)
- Added GetStats method to ChatService with database access
- Returns active_users (distinct users who sent messages in last 24h)
- Returns total_messages (non-deleted messages count)
- Returns rooms_active (rooms with messages in last 24h)
- Added GetStats handler and GET /chat/stats route
- Updated ChatService to use NewChatServiceWithDB for database access
Phase: PHASE-2
Priority: P1
Progress: 15/267 (5.6%)
- Added POST /playlists/:id/share route in router.go
- Initialized PlaylistShareService and set it in PlaylistService
- Handler CreateShareLink already existed and was fully implemented
- Standardized API response to return shareLink directly
- Route requires ownership or admin permission via middleware
Phase: PHASE-2
Priority: P1
Progress: 14/267 (5.2%)
- Added routes in router.go: POST, GET, PUT, DELETE /playlists/:id/collaborators
- Applied RequireOwnershipOrAdmin middleware to POST, PUT, DELETE routes
- GET route accessible to collaborators (service layer checks permissions)
- Fixed UpdateCollaboratorPermission handler to use RespondWithAppError
- All handlers already existed in playlist_handler.go
- All endpoints properly authenticated and ownership checks enforced
Phase: PHASE-1
Priority: P0
Progress: 5/267 (1.9%)
- Created TwoFactorHandler with SetupTwoFactor, VerifyTwoFactor, DisableTwoFactor, GetTwoFactorStatus
- Added routes: POST /auth/2fa/setup, POST /auth/2fa/verify, POST /auth/2fa/disable, GET /auth/2fa/status
- Updated LoginResponse DTO to include requires_2fa flag
- Updated Login handler to check 2FA status and return requires_2fa flag when enabled
- Reused existing TwoFactorService (already had QR generation and TOTP verification)
- Added VerifyTOTPCode helper method to TwoFactorService
- All endpoints properly authenticated with RequireAuth middleware
Phase: PHASE-1
Priority: P0
Progress: 4/267 (1.5%)
- Verified RequireOwnershipOrAdmin middleware is correctly applied to PUT/DELETE /tracks/:id
- Verified trackOwnerResolver correctly loads track from DB and returns user_id
- Added comprehensive integration tests for ownership verification
- Test: user cannot update another user's track (403 Forbidden)
- Test: user cannot delete another user's track (403 Forbidden)
- Test: admin can update any track (200 OK)
- Test: admin can delete any track (200 OK)
- Test: user can update own track (200 OK)
- Test: user can delete own track (200 OK)
- All tests pass
Phase: PHASE-1
Priority: P0
Progress: 2/267 (0.7%)
- Verified RequireOwnershipOrAdmin middleware is correctly applied to PUT /users/:id
- Added integration tests for ownership verification
- Test: user cannot update another user's profile (403 Forbidden)
- Test: admin can update any profile (200 OK)
- Test: user can update own profile (200 OK)
- All tests pass
Phase: PHASE-1
Priority: P0
Progress: 1/267 (0.4%)
